mirror of
https://github.com/NousResearch/hermes-agent.git
synced 2026-05-21 03:39:54 +00:00
Teknium
241032455c
* fix: circuit breaker stops CPU-burning restart loops on persistent errors
When a gateway session hits a non-retryable error (e.g. invalid model
ID → HTTP 400), the agent fails and returns. But if the session keeps
receiving messages (or something periodically recreates agents), each
attempt spawns a new AIAgent — reinitializing MCP server connections,
burning CPU — only to hit the same 400 error again. On a 4-core server,
this pegs an entire core per stuck session and accumulates 300+ minutes
of CPU time over hours.
Fix: add a per-session consecutive failure counter in the gateway runner.
- Track consecutive non-retryable failures per session key
- After 3 consecutive failures (_MAX_CONSECUTIVE_FAILURES), block
further agent creation for that session and notify the user:
'⚠️ This session has failed N times in a row with a non-retryable
error. Use /reset to start a new session.'
- Evict the cached agent when the circuit breaker engages to prevent
stale state from accumulating
- Reset the counter on successful agent runs
- Clear the counter on /reset and /new so users can recover
- Uses getattr() pattern so bare GatewayRunner instances (common in
tests using object.__new__) don't crash
Tests:
- 8 new tests in test_circuit_breaker.py covering counter behavior,
threshold, reset, session isolation, and bare-runner safety
Addresses #7130.
* Revert "fix: circuit breaker stops CPU-burning restart loops on persistent errors"
This reverts commit d848ea7109.
* fix: don't evict cached agent on failed runs — prevents MCP restart loop
When a run fails (e.g. invalid model ID → 400) and fallback activated,
the gateway was evicting the cached agent to 'retry primary next time.'
But evicting a failed agent forces a full AIAgent recreation on the next
message — reinitializing MCP server connections, spawning stdio
processes — only to hit the same 400 again. This created a CPU-burning
loop (91%+ for hours, #7130).
The fix: add `and not _run_failed` to the fallback-eviction check.
Failed runs keep the cached agent. The next message reuses it (no MCP
reinit), hits the same error, returns it to the user quickly. The user
can /reset or /model to fix their config.
Successful fallback runs still evict as before so the next message
retries the primary model.
Addresses #7130.
Hermes Agent ☤
The self-improving AI agent built by Nous Research. It's the only agent with a built-in learning loop — it creates skills from experience, improves them during use, nudges itself to persist knowledge, searches its own past conversations, and builds a deepening model of who you are across sessions. Run it on a $5 VPS, a GPU cluster, or serverless infrastructure that costs nearly nothing when idle. It's not tied to your laptop — talk to it from Telegram while it works on a cloud VM.
Use any model you want — Nous Portal, OpenRouter (200+ models), z.ai/GLM, Kimi/Moonshot, MiniMax, OpenAI, or your own endpoint. Switch with hermes model — no code changes, no lock-in.
| A real terminal interface | Full TUI with multiline editing, slash-command autocomplete, conversation history, interrupt-and-redirect, and streaming tool output. |
| Lives where you do | Telegram, Discord, Slack, WhatsApp, Signal, and CLI — all from a single gateway process. Voice memo transcription, cross-platform conversation continuity. |
| A closed learning loop | Agent-curated memory with periodic nudges. Autonomous skill creation after complex tasks. Skills self-improve during use. FTS5 session search with LLM summarization for cross-session recall. Honcho dialectic user modeling. Compatible with the agentskills.io open standard. |
| Scheduled automations | Built-in cron scheduler with delivery to any platform. Daily reports, nightly backups, weekly audits — all in natural language, running unattended. |
| Delegates and parallelizes | Spawn isolated subagents for parallel workstreams. Write Python scripts that call tools via RPC, collapsing multi-step pipelines into zero-context-cost turns. |
| Runs anywhere, not just your laptop | Six terminal backends — local, Docker, SSH, Daytona, Singularity, and Modal. Daytona and Modal offer serverless persistence — your agent's environment hibernates when idle and wakes on demand, costing nearly nothing between sessions. Run it on a $5 VPS or a GPU cluster. |
| Research-ready | Batch trajectory generation, Atropos RL environments, trajectory compression for training the next generation of tool-calling models. |
Quick Install
curl -fsSL https://raw.githubusercontent.com/NousResearch/hermes-agent/main/scripts/install.sh | bash
Works on Linux, macOS, WSL2, and Android via Termux. The installer handles the platform-specific setup for you.
Android / Termux: The tested manual path is documented in the Termux guide. On Termux, Hermes installs a curated
.[termux]extra because the full.[all]extra currently pulls Android-incompatible voice dependencies.Windows: Native Windows is not supported. Please install WSL2 and run the command above.
After installation:
source ~/.bashrc # reload shell (or: source ~/.zshrc)
hermes # start chatting!
Getting Started
hermes # Interactive CLI — start a conversation
hermes model # Choose your LLM provider and model
hermes tools # Configure which tools are enabled
hermes config set # Set individual config values
hermes gateway # Start the messaging gateway (Telegram, Discord, etc.)
hermes setup # Run the full setup wizard (configures everything at once)
hermes claw migrate # Migrate from OpenClaw (if coming from OpenClaw)
hermes update # Update to the latest version
hermes doctor # Diagnose any issues
CLI vs Messaging Quick Reference
Hermes has two entry points: start the terminal UI with hermes, or run the gateway and talk to it from Telegram, Discord, Slack, WhatsApp, Signal, or Email. Once you're in a conversation, many slash commands are shared across both interfaces.
| Action | CLI | Messaging platforms |
|---|---|---|
| Start chatting | hermes |
Run hermes gateway setup + hermes gateway start, then send the bot a message |
| Start fresh conversation | /new or /reset |
/new or /reset |
| Change model | /model [provider:model] |
/model [provider:model] |
| Set a personality | /personality [name] |
/personality [name] |
| Retry or undo the last turn | /retry, /undo |
/retry, /undo |
| Compress context / check usage | /compress, /usage, /insights [--days N] |
/compress, /usage, /insights [days] |
| Browse skills | /skills or /<skill-name> |
/skills or /<skill-name> |
| Interrupt current work | Ctrl+C or send a new message |
/stop or send a new message |
| Platform-specific status | /platforms |
/status, /sethome |
For the full command lists, see the CLI guide and the Messaging Gateway guide.
Documentation
All documentation lives at hermes-agent.nousresearch.com/docs:
| Section | What's Covered |
|---|---|
| Quickstart | Install → setup → first conversation in 2 minutes |
| CLI Usage | Commands, keybindings, personalities, sessions |
| Configuration | Config file, providers, models, all options |
| Messaging Gateway | Telegram, Discord, Slack, WhatsApp, Signal, Home Assistant |
| Security | Command approval, DM pairing, container isolation |
| Tools & Toolsets | 40+ tools, toolset system, terminal backends |
| Skills System | Procedural memory, Skills Hub, creating skills |
| Memory | Persistent memory, user profiles, best practices |
| MCP Integration | Connect any MCP server for extended capabilities |
| Cron Scheduling | Scheduled tasks with platform delivery |
| Context Files | Project context that shapes every conversation |
| Architecture | Project structure, agent loop, key classes |
| Contributing | Development setup, PR process, code style |
| CLI Reference | All commands and flags |
| Environment Variables | Complete env var reference |
Migrating from OpenClaw
If you're coming from OpenClaw, Hermes can automatically import your settings, memories, skills, and API keys.
During first-time setup: The setup wizard (hermes setup) automatically detects ~/.openclaw and offers to migrate before configuration begins.
Anytime after install:
hermes claw migrate # Interactive migration (full preset)
hermes claw migrate --dry-run # Preview what would be migrated
hermes claw migrate --preset user-data # Migrate without secrets
hermes claw migrate --overwrite # Overwrite existing conflicts
What gets imported:
- SOUL.md — persona file
- Memories — MEMORY.md and USER.md entries
- Skills — user-created skills →
~/.hermes/skills/openclaw-imports/ - Command allowlist — approval patterns
- Messaging settings — platform configs, allowed users, working directory
- API keys — allowlisted secrets (Telegram, OpenRouter, OpenAI, Anthropic, ElevenLabs)
- TTS assets — workspace audio files
- Workspace instructions — AGENTS.md (with
--workspace-target)
See hermes claw migrate --help for all options, or use the openclaw-migration skill for an interactive agent-guided migration with dry-run previews.
Contributing
We welcome contributions! See the Contributing Guide for development setup, code style, and PR process.
Quick start for contributors:
git clone https://github.com/NousResearch/hermes-agent.git
cd hermes-agent
curl -LsSf https://astral.sh/uv/install.sh | sh
uv venv venv --python 3.11
source venv/bin/activate
uv pip install -e ".[all,dev]"
python -m pytest tests/ -q
RL Training (optional): To work on the RL/Tinker-Atropos integration:
git submodule update --init tinker-atropos uv pip install -e "./tinker-atropos"
Community
- 💬 Discord
- 📚 Skills Hub
- 🐛 Issues
- 💡 Discussions
License
MIT — see LICENSE.
Built by Nous Research.